SMOC-PC Builder
這是在Windows 95或更高版本操作系統上運行的軟件。這個軟件的主要目的是搭建/工程實施AIDA和/或SMOC模型;配置Exasmoc在線控制器和DCS定義界面。如本手冊A部分所述,它將生成.EXA文件。然后這些文件通過以太網或便攜式媒體(如Zip磁盤,MO,DAT等)從這臺計算機下載到Exasmoc站。
Exasmoc站
這是一臺基于Windows的計算機,其用于運行實際的Exasmoc在線控制器軟件。
圖B1.1.1顯示了Exasmoc在線控制器作為Exaopc服務器的客戶端。
VF701卡為計算機和V/VL網之間提供了一個硬件接口。此外,還有Ethernet卡用于在計算機和Ethernet之間提供硬件接口。
Exaopc
Exaopc是一個在CENTUM CS 3000/1000 DCS和應用軟件(如Exasmoc在線控制器)之間提供OPC(開放工廠連接)基礎標準接口的服務器。由于Exasmoc是客戶端,它通過Exaopc服務器讀取/寫入FCS上的相關過程數據。
遠程監控和操作
該軟件包將幫助過程控制工程師使用Windows計算機和基于Visual Basic(VB)的窗口遠程訪問Exasmoc控制器。在本部分手冊中主要介紹了基于HIS的Windows操作。若要了解基于VB的Windows操作,參考C部分,因為它不屬于CENTUM CS 3000/1000 HIS窗口部分。
Vnet / IP
Vnet / IP是連接HIS,F(xiàn)CS,HIS / ENG,Exasmoc和Exaopc等站點的一條100 Mbps實時控制總線。V net用于CENTUM CS 3000 DCS。其可以是單或雙冗余總線。
VL net
VL net是連接HIS,F(xiàn)CS,HIS / ENG,Exasmoc站和Exaopc站等站點的一條10 Mbps實時控制總線。VL net用于CENTUM CS 1000 DCS。其可以是單或雙冗余總線。
Ethernet
HIS,HIS / ENG,Exasmoc站,Exaopc站和可選的遠程監控站(用于Exasmoc)可以在Ethernet上連接。CENTUM CS 3000和1000 DCS中的以太網具有以下功能 -
- HIS趨勢數據文件傳送到PC端;
- 在兩臺HIS上調整數據;
- 傳輸HIS上Exasmoc操作員窗口的相關Exasmoc數據;
- 傳輸來自遠程監控站上Exasmoc VB Windows的相關Exasmoc數據。
也可以看看
有關DCS相關站點和Exaopc的詳細信息,另見相應的通用規范(GS),技術信息(TI)和使用手冊(IM)。
也可以看看
此處顯示的系統配置屬于通用性質。有關用戶系統配置的詳細信息,用戶應參考相應的項目文檔。
原文:
SMOC-PC Builder
This is software running on Windows 95 or higher OS. The main purpose of this Software is to build/engineer AIDA and/or SMOC model; configure Exasmoc online controller and DCS definition interface. It will generate .EXA file as explained in Part A of this manual. These files will be then downloaded from this computer to Exasmoc station either through Ethernet or through portable media (e.g. Zip disk, MO, DAT etc)
Exasmoc station
This is a Windows based computer where actual Exasmoc online controller Software will be running.
Figure B1.1.1 shows the Exasmoc online controller as client to Exaopc server.
VF701 Card provides Hardware interface between computer and V/VL net. Further there is also an Ethernet card for providing Hardware interface between computer and Ethernet.
Exaopc
Exaopc is a server, offering an OPC (Open Product Connectivity) Foundation standard interface between CENTUM CS 3000/1000 DCS and application Software such as Exasmoc online controller. As Exasmoc is client, it reads/writes process related data on FCS through Exaopc server.
Remote monitoring and operation
This package will help process control engineer to remotely access Exasmoc controller using Windows computer and Visual Basic (VB) based windows. In this part of the manual HIS based windows operation is covered. However for VB based windows operation refer Part C, as it is not a part of CENTUM CS 3000/1000 HIS windows.
Vnet/IP
Vnet/IP is a 100 Mbps real time control bus, which links stations such as HIS, FCS, HIS/ENG, Exasmoc and Exaopc. V net is used on CENTUM CS 3000 DCS. This can be single or dual redundant bus.
VL net
VL net is a 10 Mbps real time control bus which links stations such as HIS, FCS, HIS/ENG, Exasmoc station and Exaopc station. VL net is used on CENTUM CS 1000 DCS. This can be single or dual redundant bus.
Ethernet
HIS, HIS/ENG, Exasmoc station, Exaopc station, and optional remote monitoring station (for Exasmoc) can be connected on Ethernet. Ethernet in CENTUM CS 3000 and 1000 DCS has following functions –
- HIS trend data files to PC’s
- Equalizing data in two HIS’
- Exasmoc related data to and from Exasmoc operator windows on HIS.
- Exasmoc related data to and from Exasmoc VB Windows on remote monitoring station.
SEE ALSO
For the details of DCS related stations and Exaopc, see also respective General Specifications (GS), Technical Information (TI) and Instruction Manual (IM).
SEE ALSO
The system configuration shown here is in generic nature. For the details of users system configuration, user shall refer to respective project documentation.
2016.11.29