B1.3 CS系統配置
下圖是CENTUM CS與其它版本DCS系統的一個典型配置，包含Exasmoc站和Exoopc接口。
用戶的實際系統配置和這些典型系統配置相類似。
CENTUM CS的系統配置
系統配置組件說明
信息和指揮站（ICS）
ICS是基于Unix的站，主要用于BRC和ERC操作和監視 - 它顯示了用于用戶快速掌握工廠運行狀態所需的過程變量，控制參數，報警，圖形，趨勢等。
控制臺類型ICS是高性能和高可靠性的站。
桌面ICS與標準控制臺類型ICS具有相同的功能，但其是桌面版本。
APC操作員站
這是用于過程操作員和工程師操作和監控APC的專用站。用戶可以在此站上使用基于Windows的PC和基于Visual Basic（VB）的圖形用戶界面（GUI）訪問Exasmoc控制器。
現場控制站（FCS）
除了許多其它功能之外，FCS主要控制BRC和ERC模式的工廠。如果用戶在項目中使用COAST模塊，則它將在FCS下運行。
工程師工作站（EWS）
這是一臺具有工程功能的基于Unix的工作站，用于執行CENTUM CS系統生成和維護管理。
Exasmoc站
這是一臺基于Windows的計算機，其中運行了實際的Exasmoc在線控制器S / W。圖B1.2.1顯示了作為Exaopc服務器客戶端的Exasmoc在線控制器。
VF701卡在計算機和V Net之間提供了一個H / W接口。此外，還有用于計算機和E-net之間提供H / W接口的Ethernet卡。
SMOC-PC Builder
這是在Windows 95或更高版本操作系統上運行的S/W。此S/W主要用于構建/工程配置AIDA和/或SMOC模型，配置Exasmoc在線控制器和DCS定義接口。如本手冊A部分所述，它將生成.EXA文件。這些文件將通過E-net / Ethernet或通過便攜式媒體（如Zip磁盤，MO，DAT等）從這臺計算機下載到Exasmoc站。
Exaopc
Exaopc是在CENTUM CS DCS和應用程序S/W（如Exasmoc在線控制器）之間提供OPC（開放工廠連接）基礎標準接口的一個服務器。Exasmoc作為客戶端，通過Exaopc服務器讀取/寫入FCS上的過程相關數據。
遠程監控和操作
這是一個可選包;它將幫助過程控制工程師使用Windows計算機和Visual Basic（VB）遠程訪問Exasmoc控制器。
原文：
B1.3 CS System Configuration
The following is a typical system configuration which includes Exasmoc station, Exaopc interface with CENTUM CS and other vendor DCS.
Users’ actual system configuration will be similar to this typical system configuration.
System Configuration for CENTUM CS
Description of System Configuration Components
Information and Command Station (ICS)
The ICS is the Unix based station mainly used for BRC and ERC operation and monitoring – it displays process variables, control parameters, alarms, graphics, trends, etc. necessary for users to quickly grasp the operating status of the plant.
Console type ICS is the high performance and high reliability station.
Desktop ICS has the same function as the standard console-type ICS but in a desktop version.
APC Operator Station
This is a dedicated station for process operator and engineer for operation and monitoring APC. One can access Exasmoc controller using Windows based PC and Visual Basic (VB) based Graphic User Interface (GUI) on this station.
Field Control Station (FCS)
The FCS mainly controls the plant in BRC and ERC modes besides its many other functions. If the COAST modules are used in the user project then it is intended to run under FCS.
Engineering Work Station (EWS)
This is a Unix based workstation with engineering function used to perform CENTUM CS system generation and maintenance management.
Exasmoc station
This is a Windows based computer where actual Exasmoc online controller S/W will be running. Figure B1.2.1 shows the Exasmoc online controller as client to Exaopc server.
VF701 Card provides H/W interface between computer and V Net. Further there is also an Ethernet card for providing H/W interface between computer and E-net.
SMOC-PC Builder
This is a S/W running on Windows 95 or higher OS. The main purpose of this S/W is to build/engineer AIDA and/or SMOC model, configure Exasmoc online controller and DCS definition interface. It will generate .EXA files as explained in Part A of this manual. These files will be then downloaded from this computer to Exasmoc station either through E-net/Ethernet or through portable media (e.g. Zip disk, MO, DAT etc)
Exaopc
Exaopc is a server, offering an OPC (Open Product Connectivity) Foundation standard interface between CENTUM CS DCS and application S/W such as Exasmoc online controller. As Exasmoc is client, it reads/writes process related data on FCS through Exaopc server.
Remote monitoring and operation
This is an optional package; it will help process control engineer to remotely access Exasmoc controller using Windows computer and Visual Basic (VB).
2016.11.29
