Vnet / IP
Vnet / IP是一條連接ICS，F(xiàn)CS，Exasmoc和Exaopc等站點的100 Mbps實時控制總線。其可以是單或雙冗余總線。
E-net
這是CENTUM CS系統內部的一條LAN。ICS，EWS，Exasmoc站，Exaopc站，APC操作員站和可選的遠程操作/監控站可以連接到E-net。E-net的電氣和物理規格與Ethernet相同。
通信網關單元（ACG）
ACG用于將V-net連接到E-net。
也可以看看
有關DCS相關站點和Exaopc的詳細信息，另見相應的通用規范（GS），技術信息（TI）和使用手冊（IM）。
也可以看看
此處顯示的系統配置屬于通用性質。有關用戶系統配置的詳細信息，用戶應參考相應的項目文檔。
B1.4其他廠商的系統配置
以下是Exasmoc站與CENTUM XL和其他供應商DCS的Exaopc接口的典型系統配置。
用戶的實際系統配置類似于此典型系統配置。
其他供應商DCS的系統配置
系統配置組件說明
操作站
操作站主要用于BRC和ERC的操作和監視 – 其顯示了過程變量，控制參數，報警，圖形，趨勢等信息，以便用戶快速掌握工廠的運行狀態。
APC操作站
這是過程操作員和工程師用于操作和監控APC的專用站。用戶可以在此站上使用基于Windows的PC和基于Visual Basic（VB）的圖形用戶界面（GUI）訪問Exasmoc控制器。
控制站
除了許多其他功能之外，F(xiàn)CS主要控制BRC和ERC模式的工廠。
Exasmoc站
這是一臺基于Windows的計算機，其將運行實際的Exasmoc在線控制器S/W。
圖B1.5.1顯示了Exasmoc在線控制器作為Exaopc服務器的客戶端。
還有一個Ethernet卡用于在計算機和Ethernet之間提供H / W接口。
SMOC-PC Builder
這是在Windows 95或更高版本操作系統上運行的S/W。此S/W主要用于建立/工程配置AIDA和/或SMOC模型;配置Exasmoc在線控制器和DCS定義界面。如本手冊A部分所述，它將生成.EXA文件。這些文件將通過Ethernet或通過便攜式媒體（如Zip磁盤，MO，DAT等）從這臺計算機下載到Exasmoc站。
Exaopc與其他供應商的接口/ OPC服務器
Exaopc或具有其他供應商接口的OPC服務器在其他供應商DCS（使用供應商DCS的典型接口盒）和S/W應用（如Exasmoc在線控制器）之間提供OPC（開放工廠連接）基礎標準接口。由于Exasmoc也是OPC客戶端，它是通過Exaopc服務器在控制站上讀/寫與過程相關的數據的。
提前進行Exasmoc與其他供應商DCS之間的連接測試是必不可少的。
原文：
Vnet/IP
Vnet/IP is a 100 Mbps real time control bus, which links stations such as ICS, FCS, Exasmoc and Exaopc. This can be single or dual redundant bus.
E-net
This is a LAN, internal to CENTUM CS system. ICS, EWS, Exasmoc station, Exaopc station, APC operator station and optional remote operation/monitoring station can be connected on E-net. The electrical and physical specifications of E-net are same as Ethernet.
Communication Gateway Unit (ACG)
The ACG is used to link the V-net to an E-net
SEE ALSO
For the details of DCS related stations and Exaopc, see also respective General Specifications (GS), Technical Information (TI) and Instruction Manual (IM).
SEE ALSO
The system configuration shown here is in generic nature. For the details of users system configuration, user shall refer to respective project documentation.
B1.4 Other Vendor’s System Configuration
The following is a typical system configuration which includes Exasmoc station and Exaopc interface with CENTUM XL and other vendor DCS.
Users’ actual system configuration will be similar to this typical system configuration.
System Configuration for Other Vendor DCS
Description of System Configuration components
Operator station
Operator station mainly used for BRC and ERC operation and monitoring – it displays process variables, control parameters, alarms, graphics, trends, etc. necessary for users to quickly grasp the operating status of the plant.
APC Operator Station
This is a dedicated station for process operator and engineer for operation and monitoring APC. One can access Exasmoc controller using Windows based PC and Visual Basic (VB) based Graphic User Interface (GUI) on this station.
Control Station
The FCS mainly controls the plant in BRC and ERC modes besides its many other functions.
Exasmoc station
This is a Windows based computer where actual Exasmoc online controller S/W will be running.
Figure B1.5.1 shows the Exasmoc online controller as client to Exaopc server.
There is also an Ethernet card for providing H/W interface between computer and Ethernet.
SMOC-PC Builder
This is a S/W running on Windows 95 or higher OS. The main purpose of this S/W is to build/engineer AIDA and/or SMOC model; configure Exasmoc online controller and DCS definition interface. It will generate .EXA files as explained in Part A of this manual. These files will be then downloaded from this computer to Exasmoc station either through Ethernet or through portable media (e.g. Zip disk, MO, DAT etc)
Exaopc with other vendor’s interface / OPC Server
Exaopc or an OPC Server with other vendor’s interface offers an OPC (Open Product Connectivity) Foundation standard interface between other vendor DCS (using typical interface cassette for vendor’s DCS) and application S/W such as Exasmoc online controller. As Exasmoc is also OPC client, it reads/writes process related data on Control Station through Exaopc server.
Connection test between Exasmoc with other vendor’s DCS is indispensable in advance.
2016.11.29
