UITableView繼承自UIScrollview,是蘋果為我們封裝好的一個基于scroll的控件。上面主要是一個個的UITableViewCell,可以讓UITableViewCell響應一些點擊事件,也可以在UITableViewCell中加入U(xiǎn)ITextField或者UITextView等子視圖,使得可以在cell上進行文字編輯。
UITableView中的cell可以有很多,一般會通過重用cell來達到節省內存的目的:通過為每個cell指定一個重用標識符(reuseIdentifier),即指定了單元格的種類,當cell滾出屏幕時,會將滾出屏幕的單元格放入重用的queue中,當某個未在屏幕上的單元格要顯示的時候,就從這個queue中取出單元格進行重用。
但對于多變的自定義cell,有時這種重用機制會出錯。比如,當一個cell含有一個UITextField的子類并被放在重用queue中以待重用,這時如果一個未包含任何子視圖的cell要顯示在屏幕上,就會取出并使用這個重用的cell顯示在無任何子視圖的cell中,這時候就會出錯。
解決方法:
方法1 將獲得cell的方法從- (UITableViewCell)dequeueReusableCellWithIdentifier:(NSString)identifier 換為-(UITableViewCell *)cellForRowAtIndexPath:(NSIndexPath *)indexPath
重用機制調用的就是dequeueReusableCellWithIdentifier這個方法,方法的意思就是“出列可重用的cell”,因而只要將它換為cellForRowAtIndexPath(只從要更新的cell的那一行取出cell),就可以不使用重用機制,因而問題就可以得到解決,雖然可能會浪費一些空間。
示例代碼:
[plain]
(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改為以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根據indexPath準確地取出一行,而不是從cell重用隊列中取出, ?此方法會每次都調用UITableViewCell的初始化方法, 注意了。
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代碼
}(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
// UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //改為以下的方法
UITableViewCell *cell = [tableView cellForRowAtIndexPath:indexPath]; //根據indexPath準確地取出一行,而不是從cell重用隊列中取出
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代碼
}
方法2 通過為每個cell指定不同的重用標識符(reuseIdentifier)來解決。
重用機制是根據相同的標識符來重用cell的,標識符不同的cell不能彼此重用。于是我們將每個cell的標識符都設置為不同,就可以避免不同cell重用的問題了。
示例代碼:
[plain]
-
(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath來唯一確定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代碼
} -
(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{NSString *CellIdentifier = [NSString stringWithFormat:@"Cell%d%d", [indexPath section], [indexPath row]];//以indexPath來唯一確定cell
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
//...其他代碼
}
方法3 刪除重用cell的所有子視圖
這個方法是通過刪除重用的cell的所有子視圖,從而得到一個沒有特殊格式的cell,供其他cell重用。
示例代碼:
[plain]
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
static NSString *CellIdentifier = @"Cell";
UITableViewCell cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; //出列可重用的cell
if (cell == nil) {
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier];
}
else
{
//刪除cell的所有子視圖
while ([cell.contentView.subviews lastObject] != nil)
{
[(UIView)[cell.contentView.subviews lastObject] removeFromSuperview];
}
}
//...其他代碼
}