YEP.130 – Battle System – Standard Turn Battle – RPG Maker MV
Introduction
This plugin requires YEP_X_BattleSysSTB. Make sure this plugin is located under YEP_X_BattleSysSTB in the plugin list.
這個插件需要YEP_X_BattleSysSTB，確保插件放在YEP_X_BattleSysSTB下面
To use the STB system, go to the Battle Engine Core plugin and change the ‘Default System’ setting in the parameters to ‘stb’.
為了使用STB系統，請去Battle Engine Core更改默認系統為stb
The Standard Turn Battle system functions off of the Default Turn Battle system’s structure. Action orders are determined by the battlers’ AGI values and they go from highest to lowest. However, actions are not selected at the start of the turn. Instead, the turn progresses and the actions are picked as each battler’s turn appears, then proceeds to be executed immediately.
標準回合制戰斗系統源于默認回合制戰斗系統。行動順序是由戰斗者的敏捷值決定。只不過并不是一開始決定所有人的行動，而是等到行動回合在指定行動。
Each battler is only allowed one action per battle turn, meaning a single battler cannot have twice the number of turns as another battler even if the battler’s AGI value is double that of the other. This is to prevent any balancing issues that come from tick-based battle systems as they tend to be far more difficult to balance compared to turn-based battle systems.
每個角色在一個戰斗流程回合內只能執行一次行動，這意味著就算戰斗者的敏捷值是其他的兩倍也不可以執行兩次行動。這是為了更好和更簡易的平衡性，因為tick-based的戰斗比回合制復雜的多
Because of the nature of the Standard Turn Battle System, an item or skill’s action speed value found in the database will be disabled as it cannot push forward a battler’s in the turn order.
因為標準回合戰斗制系統的原因，物品或者技能的行動速度會被禁用
Plugin Commands
To change your battle system to Standard Turn Battle if it isn’t the default battle system, you can use the following Plugin Command:
采用下面的插件命令來設置戰斗系統
Plugin Command:
setBattleSys STB
Sets battle system to Standard Turn Battle.
設置戰斗為STB系統
setBattleSys DTB
Sets battle system to Default Turn Battle.
設置戰斗為DTB系統
Using the above Plugin Commands, you can toggle between the Default Battle System and Standard Turn Battle!
使用上面的插件名來，你可以再DTB和STB之間切換
Notetags
The following are notetags that pertain to and affect the STB system.
下面的插件可以適用于STB系統
Skill and Item Notetags:
<STB Help>
text
text
</STB Help>
For those planning on using multiple battle systems, sometimes you may have your skills perform differently while using STB. If so, using this notetag will allow skills and items to display different help text while STB is enabled.
對于想使用多種戰斗系統的人，你可能希望你的技能在STB系統中表現不同，你可以使用這段命令放在技能或者物品備注欄。
