深入分析K8S SharedInformer源碼

云原生應用（基于k8s的應用）一定繞不開SharedInformer，所以分析一下該類。

sharedInformer

SharedInformer has a shared data cache and is capable of distributing notifications for changes to the cache to multiple listeners who registered via AddEventHandler.

If you use this, there is one behavior change compared to a standard Informer. When you receive a notification, the cache will be AT LEAST as fresh as the notification, but it MAY be more fresh. You should NOT depend on the contents of the cache exactly matching the notification you've received in handler functions. If there was a create, followed by a delete, the cache may NOT have your item. This has advantages over the broadcaster since it allows us to share a common cache across many controllers. Extending the broadcaster would have required us keep duplicate caches for each watch.

sharedInformer有兩個功能，cache和注冊事件監聽。cache功能主要作用是減少對apiserver的直接訪問（ps. 畢竟 client-go里有限流=。=）。事件監聽可以幫助構建自己的云原生應用。

type SharedInformer interface {
   // AddEventHandler adds an event handler to the shared informer using the shared informer's resync
   // period.  Events to a single handler are delivered sequentially, but there is no coordination
   // between different handlers.
   AddEventHandler(handler ResourceEventHandler)
   // AddEventHandlerWithResyncPeriod adds an event handler to the shared informer using the
   // specified resync period.  Events to a single handler are delivered sequentially, but there is
   // no coordination between different handlers.
   AddEventHandlerWithResyncPeriod(handler ResourceEventHandler, resyncPeriod time.Duration)
   // GetStore returns the Store.
   GetStore() Store
   // GetController gives back a synthetic interface that "votes" to start the informer
   GetController() Controller
   // Run starts the shared informer, which will be stopped when stopCh is closed.
   Run(stopCh <-chan struct{})
   // HasSynced returns true if the shared informer's store has synced.
   HasSynced() bool
   // LastSyncResourceVersion is the resource version observed when last synced with the underlying
   // store. The value returned is not synchronized with access to the underlying store and is not
   // thread-safe.
   LastSyncResourceVersion() string
}

最重要的函數應該是：Run, AddEventHandler, GetIndexer, HasSynced

sharedInformer.Run

func (s *sharedIndexInformer) Run(stopCh <-chan struct{}) {
   defer utilruntime.HandleCrash()

   fifo := NewDeltaFIFO(MetaNamespaceKeyFunc, s.indexer)
    
   cfg := &Config{
        Queue:            fifo,
        ListerWatcher:    s.listerWatcher,
        ObjectType:       s.objectType,
        FullResyncPeriod: s.resyncCheckPeriod,
        RetryOnError:     false,
        ShouldResync:     s.processor.shouldResync,

        Process: s.HandleDeltas,
   }

   func() {
      s.startedLock.Lock()
      defer s.startedLock.Unlock()

      s.controller = New(cfg)
      s.controller.(*controller).clock = s.clock
      s.started = true
   }()

   // Separate stop channel because Processor should be stopped strictly after controller
   processorStopCh := make(chan struct{})
   var wg wait.Group
   defer wg.Wait()              // Wait for Processor to stop
   defer close(processorStopCh) // Tell Processor to stop
   wg.StartWithChannel(processorStopCh, s.cacheMutationDetector.Run)
   wg.StartWithChannel(processorStopCh, s.processor.run)

   defer func() {
      s.startedLock.Lock()
      defer s.startedLock.Unlock()
      s.stopped = true // Don't want any new listeners
   }()
   s.controller.Run(stopCh)
}

processor.run處理ev handler，后面再分析

controller.Run

type Controller interface {
    Run(stopCh <-chan struct{})
    HasSynced() bool
    LastSyncResourceVersion() string
}

// Run begins processing items, and will continue until a value is sent down stopCh.
// It's an error to call Run more than once.
// Run blocks; call via go.
func (c *controller) Run(stopCh <-chan struct{}) {
   defer utilruntime.HandleCrash()
   go func() {
      <-stopCh
      c.config.Queue.Close()
   }()
   r := NewReflector(
      c.config.ListerWatcher,
      c.config.ObjectType,
      c.config.Queue, // store
      c.config.FullResyncPeriod,
   )
   r.ShouldResync = c.config.ShouldResync
   r.clock = c.clock

   c.reflectorMutex.Lock()
   c.reflector = r
   c.reflectorMutex.Unlock()

   var wg wait.Group
   defer wg.Wait()

   wg.StartWithChannel(stopCh, r.Run)

   wait.Until(c.processLoop, time.Second, stopCh)
}

NewReflector & reflector.run 生產者

c.processLoop 消費者

首先分析生產者

Reflector.Run

// Reflector watches a specified resource and causes all changes to be reflected in the given store.
type Reflector struct {
   // name identifies this reflector. By default it will be a file:line if possible.
   name string
   // metrics tracks basic metric information about the reflector
   metrics *reflectorMetrics

   // The type of object we expect to place in the store.
   expectedType reflect.Type
   // The destination to sync up with the watch source
   store Store
   // listerWatcher is used to perform lists and watches.
   listerWatcher ListerWatcher
   // period controls timing between one watch ending and
   // the beginning of the next one.
   period       time.Duration
   resyncPeriod time.Duration
   ShouldResync func() bool
   // clock allows tests to manipulate time
   clock clock.Clock
   // lastSyncResourceVersion is the resource version token last
   // observed when doing a sync with the underlying store
   // it is thread safe, but not synchronized with the underlying store
   lastSyncResourceVersion string
   // lastSyncResourceVersionMutex guards read/write access to lastSyncResourceVersion
   lastSyncResourceVersionMutex sync.RWMutex
}

ListAndWatch核心類

// Run starts a watch and handles watch events. Will restart the watch if it is closed.
// Run will exit when stopCh is closed.
func (r *Reflector) Run(stopCh <-chan struct{}) {
   wait.Until(func() {
      if err := r.ListAndWatch(stopCh); err != nil {
         utilruntime.HandleError(err)
      }
   }, r.period, stopCh)
}

ListAndWatch

// ListAndWatch first lists all items and get the resource version at the moment of call,
// and then use the resource version to watch.
// It returns error if ListAndWatch didn't even try to initialize watch.
func (r *Reflector) ListAndWatch(stopCh <-chan struct{}) error {
   var resourceVersion string

   // Explicitly set "0" as resource version - it's fine for the List()
   // to be served from cache and potentially be delayed relative to
   // etcd contents. Reflector framework will catch up via Watch() eventually.
   options := metav1.ListOptions{ResourceVersion: "0"}

   if err := func() error {
      var list runtime.Object
      var err error
      listCh := make(chan struct{}, 1)
      panicCh := make(chan interface{}, 1)
      go func() {
         defer func() {
            if r := recover(); r != nil {
               panicCh <- r
            }
         }()
         list, err = r.listerWatcher.List(options)
         close(listCh)
      }()
      select {
      case <-stopCh:
         return nil
      case r := <-panicCh:
         panic(r)
      case <-listCh:
      }
      listMetaInterface, err := meta.ListAccessor(list)
      resourceVersion = listMetaInterface.GetResourceVersion()
      items, err := meta.ExtractList(list)
      
      // 同步緩存 
      if err := r.syncWith(items, resourceVersion); err != nil {
         return fmt.Errorf("%s: Unable to sync list result: %v", r.name, err)
      }
      
      r.setLastSyncResourceVersion(resourceVersion)
      return nil
   }(); err != nil {
      return err
   }

    
// syncWith replaces the store's items with the given list.
func (r *Reflector) syncWith(items []runtime.Object, resourceVersion string) error {
    found := make([]interface{}, 0, len(items))
    for _, item := range items {
        found = append(found, item)
    }
    return r.store.Replace(found, resourceVersion)
}

list一份完整的資源；更新緩存；Replace

   resyncerrc := make(chan error, 1)
   cancelCh := make(chan struct{})
   defer close(cancelCh)
   go func() {
      resyncCh, cleanup := r.resyncChan()
      defer func() {
         cleanup() // Call the last one written into cleanup
      }()
      for {
         select {
         case <-resyncCh:
         case <-stopCh:
            return
         case <-cancelCh:
            return
         }
         if r.ShouldResync == nil || r.ShouldResync() {
            if err := r.store.Resync(); err != nil {
               resyncerrc <- err
               return
            }
         }
         cleanup()
         resyncCh, cleanup = r.resyncChan()
      }
   }()

func (r *Reflector) resyncChan() (<-chan time.Time, func() bool) {
    t := r.clock.NewTimer(r.resyncPeriod)
    return t.C(), t.Stop
}

定時重新同步存儲

   for {
      case <-stopCh:
         return nil
      default:
      }

      timeoutSeconds := int64(minWatchTimeout.Seconds() * (rand.Float64() + 1.0))
      options = metav1.ListOptions{
         ResourceVersion: resourceVersion,
         TimeoutSeconds: &timeoutSeconds,
      }

      w, err := r.listerWatcher.Watch(options)

      if err := r.watchHandler(w, &resourceVersion, resyncerrc, stopCh); err != nil {
      }
   }
}

// watchHandler watches w and keeps *resourceVersion up to date.
func (r *Reflector) watchHandler(w watch.Interface, resourceVersion *string, errc chan error, stopCh <-chan struct{}) error {
    start := r.clock.Now()
    eventCount := 0

    defer w.Stop()

loop:
    for {
        select {
        case <-stopCh:
            return errorStopRequested
        case err := <-errc:
            return err
        case event, ok := <-w.ResultChan():
            if !ok {
                break loop
            }

            newResourceVersion := meta.GetResourceVersion()
            switch event.Type {
            case watch.Added:
                err := r.store.Add(event.Object)
            case watch.Modified:
                err := r.store.Update(event.Object)
            case watch.Deleted:
                err := r.store.Delete(event.Object)
                }
            default:
            }
            *resourceVersion = newResourceVersion
            r.setLastSyncResourceVersion(newResourceVersion)
            eventCount++
        }
    }

    return nil
}

watch list之后的變更，更新store。

DeltaFIFO重要數據結構后續會分析

生產者分析完了，繼續分析消費者

controller.processLoop

需要注意Reflector.Store就是controller.config.Queue

// processLoop drains the work queue.
func (c *controller) processLoop() {
   for {
      obj, err := c.config.Queue.Pop(PopProcessFunc(c.config.Process))
   }
}

從queue中pop，返回之前調用process func

func (s *sharedIndexInformer) HandleDeltas(obj interface{}) error {
   s.blockDeltas.Lock()
   defer s.blockDeltas.Unlock()

   // from oldest to newest
   for _, d := range obj.(Deltas) {
      switch d.Type {
      case Sync, Added, Updated:
         isSync := d.Type == Sync
         s.cacheMutationDetector.AddObject(d.Object)
         if old, exists, err := s.indexer.Get(d.Object); err == nil && exists {
            s.indexer.Update(d.Object)
             
            s.processor.distribute(updateNotification{oldObj: old, newObj: d.Object}, isSync)
         } else {
            err := s.indexer.Add(d.Object)
             
            s.processor.distribute(addNotification{newObj: d.Object}, isSync)
         }
      case Deleted:
         s.indexer.Delete(d.Object)
          
         s.processor.distribute(deleteNotification{oldObj: d.Object}, false)
      }
   }
   return nil
}

處理delta增量的過程，更新完緩存之后會分發給listeners處理

func (p *sharedProcessor) distribute(obj interface{}, sync bool) {
   p.listenersLock.RLock()
   defer p.listenersLock.RUnlock()

   if sync {
      for _, listener := range p.syncingListeners {
         listener.add(obj)
      }
   } else {
      for _, listener := range p.listeners {
         listener.add(obj)
      }
   }
}

processorListener

func newProcessListener(handler ResourceEventHandler, requestedResyncPeriod, resyncPeriod time.Duration, now time.Time, bufferSize int) *processorListener {
    ret := &processorListener{
        nextCh:                make(chan interface{}),
        addCh:                 make(chan interface{}),
        handler:               handler,
        pendingNotifications:  *buffer.NewRingGrowing(bufferSize),
        requestedResyncPeriod: requestedResyncPeriod,
        resyncPeriod:          resyncPeriod,
    }

    ret.determineNextResync(now)

    return ret
}

func (p *processorListener) add(notification interface{}) {
   p.addCh <- notification
}

注意addCh是一個block channel，根據addCh找到pop方法

func (p *processorListener) pop() {
   defer utilruntime.HandleCrash()
   defer close(p.nextCh) // Tell .run() to stop

   var nextCh chan<- interface{}
   var notification interface{}
   for {
      select {
      case nextCh <- notification:
         // Notification dispatched
         var ok bool
         notification, ok = p.pendingNotifications.ReadOne()
         if !ok { // Nothing to pop
            nextCh = nil // Disable this select case
         }
      case notificationToAdd, ok := <-p.addCh:
         if notification == nil { 
            notification = notificationToAdd
            nextCh = p.nextCh
         } else { // There is already a notification waiting to be dispatched
            p.pendingNotifications.WriteOne(notificationToAdd)
         }
      }
   }
}

這段代碼比較有意思，nextCh也是一個block ch。p有一個pendingNotifications緩存未處理的notification，真正處理用nextCh。不用buffer channel做，可能是因?yàn)椴缓迷O(shè)置channel buffer size

type processorListener struct {
    nextCh chan interface{}
    addCh  chan interface{}

    handler ResourceEventHandler

    // pendingNotifications is an unbounded ring buffer that holds all notifications not yet distributed.
    // There is one per listener, but a failing/stalled listener will have infinite pendingNotifications
    // added until we OOM.
    // TODO: This is no worse than before, since reflectors were backed by unbounded DeltaFIFOs, but
    // we should try to do something better.
    pendingNotifications buffer.RingGrowing

    resyncPeriod time.Duration
    nextResync time.Time
    resyncLock sync.Mutex
}

根據nextCh找到run方法

func (p *processorListener) run() {
   stopCh := make(chan struct{})
   wait.Until(func() {
      err := wait.ExponentialBackoff(retry.DefaultRetry, func() (bool, error) {
         for next := range p.nextCh {
            switch notification := next.(type) {
            case updateNotification:
               p.handler.OnUpdate(notification.oldObj, notification.newObj)
            case addNotification:
               p.handler.OnAdd(notification.newObj)
            case deleteNotification:
               p.handler.OnDelete(notification.oldObj)
            default:
               utilruntime.HandleError(fmt.Errorf("unrecognized notification: %#v", next))
            }
         }
      })

   }, 1*time.Minute, stopCh)
}

根據notification的類型，回調注冊的handler處理函數，使用方法如下

podInformer.AddEventHandler(cache.FilteringResourceEventHandler{
   FilterFunc: pc.filter,
   Handler: cache.ResourceEventHandlerFuncs{
      AddFunc:    pc.add,
      UpdateFunc: pc.update,
      DeleteFunc: pc.delete,
   },
})

Cache

緩存的使用方法如下：

func initNodeCache() {
    informerFactory := informers.NewSharedInformerFactory(K8sClient, 0)

    nodeInformer := informerFactory.Core().V1().Nodes()
    NodeStore = nodeInformer.Lister()

    forever := make(chan struct{})
    informerFactory.Start(forever)

    if !k8scache.WaitForCacheSync(forever, nodeInformer.Informer().HasSynced) {
        return
    }
}

func (f *nodeInformer) Lister() v1.NodeLister {
    return v1.NewNodeLister(f.Informer().GetIndexer())
}

至此sharedInformer已經分析完畢，還遺留幾個重要數據結構后面分析。