最近公司項目要求MySQL高可用，加上以前公司聽過QiHoo360的Atlas，所以就嘗試搭建了一個MySQL讀寫分離，并且高可用的。
前期準備
- 準備4臺機器，系統為
CentOS release 6.6 - Ip分別為
192.168.20.121、192.168.20.122、192.168.20.123、192.168.20.124 - 4臺機器分別作為
Atlas代理服務，master MySQL，slave MySQL 1，slave MySQL 2 - 下載QiHoo360的Atlas 地址
安裝Atlas
下載得到
Atlas-XX.el6.x86_64.rpm安裝文件sudo rpm –i Atlas-XX.el6.x86_64.rpm安裝安裝在
/usr/local/mysql-proxy-
安裝目錄分析
-
bin- 可執行文件
-
encrypt用來加密密碼，后面會用到 -
mysql-proxy是MySQL自己的讀寫分離代理 -
mysql-proxyd操作Atlas VERSION
-
conf-
test.cnf配置文件 - 一個文件為一個實例，實例名即文件名，啟動需要帶上這個實例名
-
-
lib依賴包 -
log記錄日志
-
啟動命令：
/usr/local/mysql-proxy/bin/mysql-proxyd [實例名] start停止命令：
/usr/local/mysql-proxy/bin/mysql-proxyd [實例名] stop同理，
restart為重啟，status為查看狀態-
配置文件解釋
請查看官方文檔
數據庫配置
1臺master2臺slave，都要配置相同的用戶名密碼，且都要可以遠程訪問
-
分別進入3臺服務器，創建相同的用戶名密碼，創建數據庫
test，設置權限CREATE USER 'test'@'%' IDENTIFIED BY 'test123'; CREATE USER 'test'@'localhost' IDENTIFIED BY 'test123'; grant all privileges on test.* to 'test'@'%' identified by 'test123'; grant all privileges on test.* to 'test'@'localhost' identified by 'test123'; flush privileges; -
主從數據庫配置
- 配置master服務器
找到MySQL配置文件
my.cnf，一般在etc目錄下-
修改配置文件
[mysqld] # 一些其他配置 ... #主從復制配置 innodb_flush_log_at_trx_commit=1 sync_binlog=1 #需要備份的數據庫 binlog-do-db=test #不需要備份的數據庫 binlog-ignore-db=mysql #啟動二進制文件 log-bin=mysql-bin #服務器ID server-id=1 # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 重啟數據庫
service mysql restart-
進入數據庫，配置主從復制的權限
mysql -uroot -p123456 grant replication slave on *.* to 'test'@'127.0.0.1' identified by 'test123'; -
查看主數據庫信息，記住下面的
File與Position的信息，它們是用來配置從數據庫的關鍵信息。mysql> show master status; +------------------+----------+--------------+------------------+ | File | Position | Binlog_Do_DB | Binlog_Ignore_DB | +------------------+----------+--------------+------------------+ | mysql-bin.000002 | 17620976 | test | mysql | +------------------+----------+--------------+------------------+ 1 row in set (0.00 sec)
- 配置兩臺salve服務器
找到配置文件
my.cnf-
修改配置文件如下
[mysqld] # 一些其他配置 ... # 幾臺服務器不能一樣 server-id=2 # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 -
進入數據庫，配置從數據庫的信息，這里輸入剛才記錄下來的
File與Position的信息，并且在從服務器上執行：# master數據庫的ip mysql> change master to master_host='192.168.20.122', # master的用戶名 -> master_user='buck', # 密碼 -> master_password='hello', # 端口 -> master_port=3306, # master數據庫的`File ` -> master_log_file='mysql-bin.000002', # master數據庫的`Position` -> master_log_pos=17620976, -> master_connect_retry=10; -
啟動進程
mysql> start slave; Query OK, 0 rows affected (0.00 sec) -
檢查主從復制狀態，要看到下列
Slave_IO_Running、Slave_SQL_Running的信息中，兩個都是Yes，才說明主從連接正確，如果有一個是No，需要重新確定剛才記錄的日志信息，停掉“stop slave”重新進行配置主從連接。mysql> show slave status \G; *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 192.168.246.134 Master_User: buck Master_Port: 3306 Connect_Retry: 10 Master_Log_File: mysql-bin.000002 Read_Master_Log_Pos: 17620976 Relay_Log_File: mysqld-relay-bin.000002 Relay_Log_Pos: 251 Relay_Master_Log_File: mysql-bin.000002 Slave_IO_Running: Yes Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 17620976 Relay_Log_Space: 407 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 0 Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 0 Last_IO_Error: Last_SQL_Errno: 0 Last_SQL_Error: 1 row in set (0.00 sec) ERROR: No query specified
- 配置master服務器
Atlas配置
-
使用Atlas的加密工具對上面用戶的密碼進行加密
/usr/local/mysql-proxy/bin/encrypt test123 29uENYYsKLo= -
配置atlas
這是用來登錄到Atlas的管理員的賬號與密碼，與之對應的是
Atlas監聽的管理接口IP和端口，也就是說需要設置管理員登錄的端口，才能進入管理員界面，默認端口是2345，也可以指定IP登錄，指定IP后，其他的IP無法訪問管理員的命令界面。方便測試，我這里沒有指定IP和端口登錄。-
配置主數據的地址與從數據庫的地址，這里配置的主數據庫是122，從數據庫是123、124
#Atlas后端連接的MySQL主庫的IP和端口，可設置多項，用逗號分隔 proxy-backend-addresses = 192.168.20.122:3306 #Atlas后端連接的MySQL從庫的IP和端口，@后面的數字代表權重，用來作負載均衡，若省略則默認為1，可設置多項，用逗號分隔 proxy-read-only-backend-addresses = 192.168.20.123:3306@1,192.168.20.124:3306@2 -
這個是用來配置MySQL的賬戶與密碼的，就是上面創建的用戶，用戶名是
test,密碼是test123,剛剛使用Atlas提供的工具生成了對應的加密密碼pwds = buck:RePBqJ+5gI4=
-
啟動Atlas
[root@localhost /usr/local/mysql-proxy/bin]# ./mysql-proxyd test start OK: MySQL-Proxy of test is started
測試
-
進入atlas的管理界面
[root@localhost ~]#mysql -h127.0.0.1 -P2345 -uuser -ppwd Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 Server version: 5.0.99-agent-admin Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> select * from help; +----------------------------+---------------------------------------------------------+ | command | description | +----------------------------+---------------------------------------------------------+ | SELECT * FROM help | shows this help | | SELECT * FROM backends | lists the backends and their state | | SET OFFLINE $backend_id | offline backend server, $backend_id is backend_ndx's id | | SET ONLINE $backend_id | online backend server, ... | | ADD MASTER $backend | example: "add master 127.0.0.1:3306", ... | | ADD SLAVE $backend | example: "add slave 127.0.0.1:3306", ... | | REMOVE BACKEND $backend_id | example: "remove backend 1", ... | | SELECT * FROM clients | lists the clients | | ADD CLIENT $client | example: "add client 192.168.1.2", ... | | REMOVE CLIENT $client | example: "remove client 192.168.1.2", ... | | SELECT * FROM pwds | lists the pwds | | ADD PWD $pwd | example: "add pwd user:raw_password", ... | | ADD ENPWD $pwd | example: "add enpwd user:encrypted_password", ... | | REMOVE PWD $pwd | example: "remove pwd user", ... | | SAVE CONFIG | save the backends to config file | | SELECT VERSION | display the version of Atlas | +----------------------------+---------------------------------------------------------+ 16 rows in set (0.00 sec) mysql> -
使用工作接口來訪問
[root@localhost ~]#mysql -h127.0.0.1 -P1234 -utest -ptest123 Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 34 Server version: 5.0.81-log MySQL Community Server (GPL) Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | mysql | | performance_schema | | test | +--------------------+ 4 rows in set (0.00 sec) mysql>
使用可視化管理工具Navicat登錄
使用用戶名test、密碼test123、端口1234、地址192.168.20.121正常登錄。注意，這里登錄的是atlas服務器，不再是任何一個MySQL服務器
