通過VMware Tools實現物理機與虛擬機之間的文件共享。然而CentOS 7在安裝（或更新）VMware Tools可能會遇到一些問題，需要手動修改源文件并打包，重新安裝。

1. 環境說明

2. 檢查VMware Tools
   檢查是否已經安裝了VMware Tools, 如果已經安裝好，可以跳到步驟4，配置共享文件夾。
   單擊菜單 虛擬機

• 如果下拉列表中出現了如下圖所示的 更新 VMware Tools ，則說明已經安裝好了（但這并不意味著能成功配置共享文件夾，如果此時VMware默認的共享目錄/mnt/hgfs/不存在，那基本意味著需要重新安裝了），可以暫時跳過安裝步驟。
  
  檢查是否已經安裝了VMware Tools
• 如果出現 安裝 VMware Tools ，則直接點擊安裝

3. 安裝 VMware Tools

• 點擊安裝VMware Tools或更新VMware Tools后， CentOS會自動掛載VMware Tools， 雙擊打開，將里面的VMwareTools-X.tar.gz復制到桌面上
  
  拷貝安裝文件到桌面
• 在桌面打開終端，解壓tar.gz包

 [hadoop@centos7-2 Desktop]$ tar -xzvf VMwareTools-10.0.10-4301679.tar.gz 

• 進入解壓得到的vmware-tools-distrib目錄，開始安裝(需要已root身份進行)，過程中遇到需要輸入信息的，一路回車下去，采用默認設置即可

[hadoop@centos7-2 vmware-tools-distrib]$ sudo ./vmware-install.pl  

安裝過程可能不會一路順利，比如會遇到以下錯誤

Using kernel build system.
make: Entering directory `/tmp/modconfig-yqRMXf/vmhgfs-only'
/bin/make -C /lib/modules/3.10.0-514.21.1.el7.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
 MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.10.0-514.21.1.el7.x86_64'
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/message.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/dir.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/rpcout.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/filesystem.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/cpName.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/link.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/request.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/hgfsUtil.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/file.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/bdhandler.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/transport.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/module.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/super.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/stubs.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/fsutil.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/cpNameLinux.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/hgfsBd.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/backdoorGcc64.o
/tmp/modconfig-yqRMXf/vmhgfs-only/backdoorGcc64.o: warning: objtool: BackdoorHbIn()+0xd: duplicate frame pointer save
/tmp/modconfig-yqRMXf/vmhgfs-only/backdoorGcc64.o: warning: objtool: BackdoorHbOut()+0xd: duplicate frame pointer save
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/page.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/backdoor.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/hgfsEscape.o
 CC [M]  /tmp/modconfig-yqRMXf/vmhgfs-only/inode.o
/tmp/modconfig-yqRMXf/vmhgfs-only/page.c: In function ‘HgfsWbRequestWait’:
/tmp/modconfig-yqRMXf/vmhgfs-only/page.c:1649:23: warning: passing argument 3 of ‘wait_on_bit’ makes integer from pointer without a cast [enabled by default]
                      TASK_UNINTERRUPTIBLE);
                      ^
In file included from include/linux/mmzone.h:9:0,
                from include/linux/gfp.h:5,
                from include/linux/mm.h:9,
                from include/linux/pagemap.h:7,
                from /tmp/modconfig-yqRMXf/vmhgfs-only/page.c:28:
include/linux/wait.h:1044:1: note: expected ‘unsigned int’ but argument is of type ‘int (*)(void *)’
wait_on_bit(void *word, int bit, unsigned mode)
^
/tmp/modconfig-yqRMXf/vmhgfs-only/page.c:1649:23: error: too many arguments to function ‘wait_on_bit’
                      TASK_UNINTERRUPTIBLE);
                      ^
In file included from include/linux/mmzone.h:9:0,
                from include/linux/gfp.h:5,
                from include/linux/mm.h:9,
                from include/linux/pagemap.h:7,
                from /tmp/modconfig-yqRMXf/vmhgfs-only/page.c:28:
include/linux/wait.h:1044:1: note: declared here
wait_on_bit(void *word, int bit, unsigned mode)
^
make[2]: *** [/tmp/modconfig-yqRMXf/vmhgfs-only/page.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [_module_/tmp/modconfig-yqRMXf/vmhgfs-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/3.10.0-514.21.1.el7.x86_64'
make: *** [vmhgfs.ko] Error 2
make: Leaving directory `/tmp/modconfig-yqRMXf/vmhgfs-only'

上網查了下，此時需要修改vmware-tools-distrib/lib/modules/source/vmhgfs-only/page.c

[hadoop@centos7-2 vmware-tools-distrib]$ cd lib/modules/source/
[hadoop@centos7-2 source]$ tar -xvf vmhgfs.tar 
[hadoop@centos7-2 source]$ cd vmhgfs-only/
[hadoop@centos7-2 vmhgfs-only]$ chmod 777 page.c #該文件是只讀的，這里隨便更改了下權限，只要讓它可寫就行
[hadoop@centos7-2 vmhgfs-only]$ vi page.c 
# 進入文件編輯模式
:set number # 顯示行號
:1639 # 跳到第1639行，需要對該行進行修改

把第1639行的：
if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 19, 0)
改成
if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 10, 0)
說明：因為 CentOS 7 的內核版本是 3.10.0
修改保存后，重新歸檔

[hadoop@centos7-2 source]$ mv vmhgfs.tar vmhgfs.tar.bak
[hadoop@centos7-2 source]$ tar -cvf vmhgfs.tar vmhgfs-only
[hadoop@centos7-2 source]$ cd ../../..
[hadoop@centos7-2 vmware-tools-distrib]$ sudo ./vmware-install.pl   

此后一路回車下去，最終看到如下信息，表示安裝成功

Creating a new initrd boot image for the kernel.
   Starting Virtual Printing daemon:                                   done
Starting vmware-tools (via systemctl):  [  OK  ]
The configuration of VMware Tools 10.0.10 build-4301679 for Linux for this running kernel completed successfully.

Enjoy,
--the VMware team

重新啟動CentOS

4. 配置共享文件夾

打開虛擬機設置

進入虛擬機設置

啟用共享文件夾，添加物理機上需要共享的目錄

啟用共享文件夾，添加物理機上需要共享的目錄

VMware默認的共享路徑是在/mnt/hgfs，這是寫死在VMware Tools的腳本里的，我們可以從/etc/init.d/vmware-tools查到：

vmhgfs_mnt="/mnt/hgfs"
#Mount all hgfs filesystems" 
vmware_mount_vmhgfs() {
   if [ "`is_vmhgfs_mounted`" = "no" ]; then
    if [ "`vmware_vmhgfs_use_fuse`" = "yes" ]; then
       mkdir -p $vmhgfs_mnt
       vmware_exec_selinux "$vmdb_answer_BINDIR/vmhgfs-fuse \
        -o subtype=vmhgfs-fuse,allow_other $vmhgfs_mnt"
     else
        vmware_exec_selinux "mount -t vmhgfs .host:/ $vmhgfs_mnt"
     fi
 fi
}

此時在CentOS 7中就能看到物理機上面共享的文件夾了：

[hadoop@centos7-2 ~]$ ll /mnt/hgfs/
dr-xr-xr-x. 1 root root 0 Jun 15 00:17 pc-share

至此物理機與虛擬機CentOS 7之間的文件夾共享設置就成功了。