/********************************************************************? function:? g.711 decoder and encoder? ********************************************************************/? ? //hyy add 2010.4.9 begin? #include#include#includetypedef unsigned short uint16;
typedef unsigned int uint32;
#pragma pack(push, 1)
// pcm文件頭
typedef struct
{
uint32 ChunkID;? ? ? ? ? ? //00H 4 char "RIFF"標志
uint32 ChunkSize;? ? ? ? ? //04H 4 long int 文件長度 文總長-8
uint32 Format;? ? ? ? ? ? ? //08H 4 char "WAVE"標志
uint32 SubChunk1ID;? ? ? ? //0CH 4 char "fmt "標志
uint32 SubChunk1Size;? ? ? //10H 4 0x10000000H(PCM)過渡字節(不定)
uint16 AudioFormat;? ? ? ? //14H 2 int 格式類別（0x01H為PCM形式的聲音數據) 0x0100H
uint16 NumChannels;? ? ? ? //16H 2 int 通道數，單聲道為1，雙聲道為2
uint32 SampleRate;? ? ? ? ? //18H 4 int 采樣率（每秒樣本數），表示每個通道的播放速度，
uint32 ByteRate;? ? ? ? ? ? //1CH 4 long int 波形音頻數據傳送速率，其值Channels×SamplesPerSec×BitsPerSample/8
uint16 BlockAlign;? ? ? ? ? //20H 2 int 數據塊的調整數（按字節算的），其值為Channels×BitsPerSample/8
uint16 BitsPerSample;? ? ? //22H 2 每樣本的數據位數，表示每個聲道中各個樣本的數據位數。如果有多個聲道，對每個聲道而言，樣本大小都一樣。
uint32 DataTag;? ? ? ? ? ? //24H 4 char 數據標記符＂data＂
uint32 DataLen;? ? ? ? ? ? ? ? ? ? ? ? //28H 4 long int 語音數據的長度(文長-44)
}PCM_HEAD, *PPCM_HEAD;
// a-law文件頭
typedef struct
{
uint32 ChunkID;? ? ? ? ? ? //00H 4 char "RIFF"標志
uint32 ChunkSize;? ? ? ? ? //04H 4 long int 文件長度 文總長-8
uint32 Format;? ? ? ? ? ? ? //08H 4 char "WAVE"標志
uint32 SubChunk1ID;? ? ? ? //0CH 4 char "fmt "標志
uint32 SubChunk1Size;? ? ? //10H 4 0x12000000H(ALAW)
uint16 AudioFormat;? ? ? ? //14H 2 int 格式類別 0x0600H
uint16 NumChannels;? ? ? ? //16H 2 int 通道數，單聲道為1，雙聲道為2
uint32 SampleRate;? ? ? ? ? //18H 4 int 采樣率（每秒樣本數），表示每個通道的播放速度，
uint32 ByteRate;? ? ? ? ? ? //1CH 4 long int 波形音頻數據傳送速率，其值Channels×SamplesPerSec×BitsPerSample/8
uint16 BlockAlign;? ? ? ? ? //20H 2 int 數據塊的調整數（按字節算的），其值為Channels×BitsPerSample/8
//uint16 BitsPerSample;? ? ? //22H 2 每樣本的數據位數，表示每個聲道中各個樣本的數據位數。如果有多個聲道，對每個聲道而言，樣本大小都一樣。
uint32 BitsPerSample;? ? ? //22H 2 每樣本的數據位數，表示每個聲道中各個樣本的數據位數。如果有多個聲道，對每個聲道而言，樣本大小都一樣。
uint32 WaveFact;? ? ? ? ? ? ? ? ? ? ? ? //26H 4 char "fact"標志
uint32 Temp1;? ? ? ? ? ? ? ? ? ? ? ? ? ? ? //2AH 4 0x04000000H
uint32 Temp2;? ? ? ? ? ? ? ? ? ? ? ? ? ? ? //2EH 4 0x00530700H
uint32 DataTag;? ? ? ? ? ? //32H 4 char 數據標記符＂data＂
uint32 DataLen;? ? ? ? ? ? ? ? ? ? ? ? //36H 4 long int 語音數據的長度(文長-58)
}ALAW_HEAD, *PALAW_HEAD;
#pragma pack(pop)
//hyy add 2010.4.9 end
#define SIGN_BIT? ? (0x80)? ? ? /* Sign bit for a A-law byte. */
#define QUANT_MASK? (0xf)? ? ? /* Quantization field mask. */
#define NSEGS? ? ? (8)? ? ? ? /* Number of A-law segments. */
#define SEG_SHIFT? (4)? ? ? ? /* Left shift for segment number. */
#define SEG_MASK? ? (0x70)? ? ? /* Segment field mask. */
#define BIAS? ? ? ? (0x84)? ? ? /* Bias for linear code. */
#define CLIP? ? ? ? 8159
static const short seg_aend[8] = {0x1F, 0x3F, 0x7F, 0xFF,
0x1FF, 0x3FF, 0x7FF, 0xFFF};
static const short seg_uend[8] = {0x3F, 0x7F, 0xFF, 0x1FF,
0x3FF, 0x7FF, 0xFFF, 0x1FFF};
/*********** 本程序是采用查表的方式來近似ln的算法 *************/
//short alaw2linear(unsigned char a_val),ulaw2linear(unsigned char u_val);
//char? linear2alaw(short pcm_val),linear2ulaw(short pcm_val);
/*************** 檢查輸入信號在哪個壓縮區間 *********************/
static short search( short? val, short? *table, short? size)
{
short? ? ? i;
for (i = 0; i < size; i++)
{
if (val <= *table++)? ? //找出一個與輸入信號最相近的值（大于）
{
return (i);
}
}
return (size);
}
/********************* PCM 2 a-law 的壓縮 ****************************/
char linear2alaw(short? pcm_val)? ? /* 2's complement (16-bit range) */
{
short? ? ? mask;
short? ? ? seg;
unsigned char? aval;
pcm_val = pcm_val >> 3;
if (pcm_val >= 0)
{
mask = 0xD5;? ? ? ? /* sign (7th) bit = 1 */
}
else
{
mask = 0x55;? ? ? ? /* sign bit = 0 */
pcm_val = -pcm_val - 1;
}
/* Convert the scaled magnitude to segment number. */
seg = search(pcm_val, (short *)seg_aend, (short)8);
/* Combine the sign, segment, and quantization bits. */
if (seg >= 8)? ? ? ? /* out of range, return maximum value. */
{
return (unsigned char) (0x7F ^ mask);
}
else
{
aval = (unsigned char) seg << SEG_SHIFT;
if (seg < 2)
{
aval |= (pcm_val >> 1) & QUANT_MASK;
}
else
{
aval |= (pcm_val >> seg) & QUANT_MASK;
}
return (aval ^ mask);
}
}
/***************** a-law 2 PCM *******************/
/*
* alaw2linear() - Convert an A-law value to 16-bit linear PCM
*
*/
short alaw2linear(unsigned char a_val)
{
short? ? ? t;
short? ? ? seg;
a_val ^= 0x55;
t = (a_val & QUANT_MASK) << 4;
seg = ((unsigned)a_val & SEG_MASK) >> SEG_SHIFT;
switch (seg)
{
case 0:
t += 8;
break;
case 1:
t += 0x108;
break;
default:
t += 0x108;
t <<= seg - 1;
break;
}
return ((a_val & SIGN_BIT) ? t : -t);
}
/*********************** pcm 2 u law *************************/
char linear2ulaw(short pcm_val) /* 2's complement (16-bit range) */
{
short? ? ? mask;
short? ? ? seg;
unsigned char? uval;
/* Get the sign and the magnitude of the value. */
pcm_val = pcm_val >> 2;
if (pcm_val < 0)
{
pcm_val = -pcm_val;
mask = 0x7F;
}
else
{
mask = 0xFF;
}
if ( pcm_val > CLIP )
{
pcm_val = CLIP;? ? /* clip the magnitude */
}
pcm_val += (BIAS >> 2);
/* Convert the scaled magnitude to segment number. */
seg = search(pcm_val, (short *)seg_uend, (short)8);
/*
* Combine the sign, segment, quantization bits;
* and complement the code word.
*/
if (seg >= 8)? ? ? ? /* out of range, return maximum value. */
{
return (unsigned char) (0x7F ^ mask);
}
else
{
uval = (unsigned char) (seg << 4) | ((pcm_val >> (seg + 1)) & 0xF);
return (uval ^ mask);
}
}
/*
* ulaw2linear() - Convert a u-law value to 16-bit linear PCM
*
* First, a biased linear code is derived from the code word. An unbiased
* output can then be obtained by subtracting 33 from the biased code.
*
* Note that this function expects to be passed the complement of the
* original code word. This is in keeping with ISDN conventions.
*/
short ulaw2linear(unsigned char u_val)
{
short? ? ? t;
/* Complement to obtain normal u-law value. */
u_val = ~u_val;
/*
* Extract and bias the quantization bits. Then
* shift up by the segment number and subtract out the bias.
*/
t = ((u_val & QUANT_MASK) << 3) + BIAS;
t <<= ((unsigned)u_val & SEG_MASK) >> SEG_SHIFT;
return ((u_val & SIGN_BIT) ? (BIAS - t) : (t - BIAS));
}
void print_error()
{
printf("input Error!\n");
printf("input argv[1] in filename\n");
printf("input argv[2] 0=pcm:wav -> a-lam:wav\n");
printf("? ? ? ? ? ? ? 1=a-lam -> a-lam:wav\n");
printf("? ? ? ? ? ? ? 2=a-lam -> pcm:wav\n");
printf("? ? ? ? ? ? ? 3=pcm -> pcm:wav\n");
printf("? ? ? ? ? ? ? 4=pcm -> a-lam:wav\n");
printf("? ? ? ? ? ? ? 5=a-lam:wav -> pcm:wav\n");
printf("input argv[3] out filename\n");
printf("input argv[4] filehead len\n");
}
void init_pcm_head(PPCM_HEAD head)
{
head->ChunkID = 0x46464952;
//head->ChunkSize = 0xa17fe4;
head->Format = 0x45564157;
head->SubChunk1ID = 0x20746d66;
head->SubChunk1Size = 0x10;
head->AudioFormat = 0x1;
head->NumChannels = 0x2;
head->SampleRate = 0xac44;
head->ByteRate = 0x2b110;
head->BlockAlign = 0x4;
head->BitsPerSample = 0x10;
head->DataTag = 0x61746164;
//head->DataLen = 0xa17fc0;
}
void init_alaw_head(PALAW_HEAD head)
{
head->ChunkID = 0x46464952;
//head->ChunkSize = 0x50c012;
head->Format = 0x45564157;
head->SubChunk1ID = 0x20746d66;
head->SubChunk1Size = 0x12;//0x10;
head->AudioFormat = 0x6;
head->NumChannels = 0x1;//0x2;
head->SampleRate = 0x3E80;//0x1f40;//0xac44;? ? ? ? ? ? ? ? // 采樣率
head->ByteRate = 0x3E80;//0x1f40;//0x2b110;? ? ? ? ? ? ? ? ? // 波形傳送速率
head->BlockAlign = 0x01;//0x4;? ? ? ? ? ? ? ? ? ? ? // 調整數
head->BitsPerSample = 0x08;//0x10;? ? ? ? ? ? ? ? ? // 量化數
head->WaveFact = 0x74636166;
head->Temp1 = 0x4;
//head->Temp2 = 0x75300;
head->DataTag = 0x61746164;
//head->DataLen = 0x50bfe0;
}
int main(int argc, char * argv[])
{
FILE *fpin? = NULL;
FILE *fpout = NULL;
PCM_HEAD pcm_head;
ALAW_HEAD alaw_head;
char format[5] = ".wav";
char filename[50];
char c;
short pcm_val;
struct stat st;
int move_len = 0;
if (argc != 5 || ('0' > argv[2][0] || argv[2][0] > '5'))
{
print_error();
return -1;
}
move_len = atol(argv[4]);
if ('0' == argv[2][0])? // pcm:wav -> a-lam:wav
{
fpin = fopen(argv[1], "r");
if (NULL == fpin)
{
printf("OpenFile Error!\n");
return -1;
}
memset(filename, 0, sizeof (filename));
if (NULL != strstr(argv[3], format))
{
sprintf(filename, "%s", argv[3]);
}
else
{
sprintf(filename, "%s%s", argv[3], format);
}
fpout = fopen(filename, "w+");
if (NULL == fpout)
{
fclose(fpin);
printf("OpenFile Error!\n");
return -1;
}
if (1 != fread(&pcm_head, sizeof(PCM_HEAD), 1, fpin))
{
printf("ReadFile Error!\n");
goto END;
}
if (pcm_head.AudioFormat != 0x1)
{
printf("AudioFormat Error!\n");
goto END;
}
memset(&alaw_head, 0, sizeof (ALAW_HEAD));
alaw_head.ChunkID = pcm_head.ChunkID;
alaw_head.ChunkSize = (pcm_head.ChunkSize - 36) / 2 + 50;
alaw_head.Format = pcm_head.Format;
alaw_head.SubChunk1ID = pcm_head.SubChunk1ID;
alaw_head.SubChunk1Size = pcm_head.SubChunk1Size;//0x00000012;
alaw_head.AudioFormat = 0x0006;
alaw_head.NumChannels = pcm_head.NumChannels;
alaw_head.SampleRate = pcm_head.SampleRate;
alaw_head.ByteRate = pcm_head.ByteRate;
alaw_head.BlockAlign = pcm_head.BlockAlign;
alaw_head.BitsPerSample = pcm_head.BitsPerSample;
alaw_head.WaveFact = 0x74636166;? ? // 值要倒過來 "fact"
alaw_head.Temp1 = 0x00000004;
alaw_head.Temp2 = (pcm_head.ChunkSize - 36) / 2;//0x00075300;
alaw_head.DataTag = pcm_head.DataTag;
alaw_head.DataLen = (pcm_head.ChunkSize - 36) / 2;
fwrite(&alaw_head, sizeof(ALAW_HEAD), 1, fpout);
while (1 == fread(&pcm_val, sizeof(short), 1, fpin))
{
c = linear2alaw(pcm_val);
fputc(c, fpout);
}
}
else if ('5' == argv[2][0]) // a-lam:wav -> pcm:wav
{
fpin = fopen(argv[1], "r");
if (NULL == fpin)
{
printf("OpenFile Error!\n");
return -1;
}
memset(filename, 0, sizeof (filename));
if (NULL != strstr(argv[3], format))
{
sprintf(filename, "%s", argv[3]);
}
else
{
sprintf(filename, "%s%s", argv[3], format);
}
fpout = fopen(filename, "w+");
if (NULL == fpout)
{
fclose(fpin);
printf("OpenFile Error!\n");
return -1;
}
if (1 != fread(&alaw_head, sizeof(ALAW_HEAD), 1, fpin))
{
printf("ReadFile Error!\n");
goto END;
}
if (alaw_head.AudioFormat != 0x6)
{
printf("AudioFormat Error!\n");
goto END;
}
memset(&pcm_head, 0, sizeof (PCM_HEAD));
pcm_head.ChunkID = alaw_head.ChunkID;
pcm_head.ChunkSize = alaw_head.DataLen * 2 + 36;
pcm_head.Format = alaw_head.Format;
pcm_head.SubChunk1ID = alaw_head.SubChunk1ID;
pcm_head.SubChunk1Size = alaw_head.SubChunk1Size;//0x00000012;
pcm_head.AudioFormat = 0x0001;
pcm_head.NumChannels = alaw_head.NumChannels;
pcm_head.SampleRate = alaw_head.SampleRate;
pcm_head.ByteRate = alaw_head.ByteRate;
pcm_head.BlockAlign = alaw_head.BlockAlign;
pcm_head.BitsPerSample = alaw_head.BitsPerSample;
pcm_head.DataTag = alaw_head.DataTag;
pcm_head.DataLen = alaw_head.DataLen * 2;
fwrite(&pcm_head, sizeof(PCM_HEAD), 1, fpout);
while (1 == fread(&c, sizeof(char), 1, fpin))
{
pcm_val = alaw2linear(c);
fwrite(&pcm_val, sizeof(short), 1, fpout);
}
}
else
{
if (NULL != strstr(argv[1], format))
{
printf("FileFormat Error!\n");
return -1;
}
if (stat(argv[1], &st) != 0)
{
printf("Read FileSize Error!\n");
return -1;
}
fpin = fopen(argv[1], "r");
if (NULL == fpin)
{
printf("OpenFile Error!\n");
return -1;
}
memset(filename, 0, sizeof (filename));
if (NULL != strstr(argv[3], format))
{
sprintf(filename, "%s", argv[3]);
}
else
{
sprintf(filename, "%s%s", argv[3], format);
}
fpout = fopen(filename, "w+");
if (NULL == fpout)
{
fclose(fpin);
printf("OpenFile Error!\n");
return -1;
}
if (move_len)
{
fseek(fpin, move_len, SEEK_SET);
}
if ('1' == argv[2][0])? // a-lam -> a-lam:wav
{
init_alaw_head(&alaw_head);
alaw_head.ChunkSize = (st.st_size - move_len) + 50;
alaw_head.Temp2 = (st.st_size - move_len);
alaw_head.DataLen = (st.st_size - move_len);
fwrite(&alaw_head, sizeof(ALAW_HEAD), 1, fpout);
while (1 == fread(&c, sizeof(char), 1, fpin))
{
fputc(c, fpout);
}
}
else if ('2' == argv[2][0]) // a-lam -> pcm:wav
{
init_pcm_head(&pcm_head);
pcm_head.ChunkSize = (st.st_size - move_len) * 2 + 36;
pcm_head.DataLen = (st.st_size - move_len) * 2;
fwrite(&pcm_head, sizeof(PCM_HEAD), 1, fpout);
while (1 == fread(&c, sizeof(char), 1, fpin))
{
pcm_val = alaw2linear(c);
fwrite(&pcm_val, sizeof(short), 1, fpout);
}
}
else if ('3' == argv[2][0]) // pcm -> pcm:wav
{
init_pcm_head(&pcm_head);
pcm_head.ChunkSize = (st.st_size - move_len) + 36;
pcm_head.DataLen = (st.st_size - move_len);
fwrite(&pcm_head, sizeof(PCM_HEAD), 1, fpout);
while (1 == fread(&pcm_val, sizeof(short), 1, fpin))
{
fwrite(&pcm_val, sizeof(short), 1, fpout);
}
}
else if ('4' == argv[2][0]) // pcm -> a-lam:wav
{
init_alaw_head(&alaw_head);
alaw_head.ChunkSize = (st.st_size - move_len) / 2 + 50;
alaw_head.Temp2 = (st.st_size - move_len) / 2;
alaw_head.DataLen = (st.st_size - move_len) / 2;
fwrite(&alaw_head, sizeof(ALAW_HEAD), 1, fpout);
while (1 == fread(&pcm_val, sizeof(short), 1, fpin))
{
c = linear2alaw(pcm_val);
fputc(c, fpout);
}
}
}
printf("OK!\n");
END:
fclose(fpin);
fclose(fpout);
return 1;
}
