右下角的狀態欄示意
顯示器的左側顯示了以右側相應筆顏色顯示的8個位號趨勢。每個位號趨勢的刷新周期為15秒。
點擊單個位號，將顯示該特定位號數據刻度的高低限設置。
? 用于趨勢的遠程計算機或本地計算機名。
? 控制器/估算器名或無控制器/估算器分配。
? 顯示屏的當前頁面。
? 時間范圍。
? 數據量程跨度。
筆分配面板
表B 15.4筆分配視圖
Table B 15.4 Pen assign view
|條目| 描述|
| ------------- |:-------------:| -----:|
|更新部分|
|Server Location （服務器位置） |如下所示，“Specify Station Name（指定站名稱）”窗口將彈出。輸入安裝Exasmoc服務器的計算機/ Station名稱。|
|Main Controller （主控制器） |從列出當前運行的控制器的下拉菜單中選擇主控制器名稱。|
|Sub Controller（子控制器）| 從列出了與所選主控制器相對應的子控制器的下拉菜單中選擇子控制器名稱。|
|Trend Type（趨勢類型） |選擇趨勢類型。當選擇‘Historical’時，將顯示標準趨勢圖。當選擇‘Prediction’時，將顯示預測數據。|
|Acquisition Data （獲取數據）| 從下拉菜單中選擇需要趨勢圖的項目數據。下表顯示了要趨勢化的數據列表。|
|Low Limit / High Limit（高低限） |數據刻度的高低限設置。|
|Decimal（小數點） |操作員可以在Trend panel Display（趨勢顯示面板）上選擇顯示趨勢位號值時需要的小數點位數。|
|Comment （注解）| 位號注釋輸入字段。 最多50個字符，區域可以滾動。 當選擇新的采集數據時，其名稱被默認分配。|
|Page comment（頁面注解） |每個頁面的位號注釋輸入字段。
|Number of Samples（樣本數） |每個趨勢數據的樣本數。17280：初始值，10000：最大 注）如下所示，為了增加樣本數量，還需要增加Exaopc歷史記錄的數量： ‘Start menu~ Program~ Exaopc setting’ ~ Historical data '開始菜單程序Exaopc設置~歷史數據 指定'HDASM1'文件為'2880'的倍數。默認值為17,280條記錄。|
|Graph Mode Analog / Digital（圖形模式模擬/數字） | 表示了工程師選擇的Analog（模擬）或Digital（數字）。 “Analog” - 顯示正弦波類型趨勢。 “Digital” - 顯示方波類型趨勢。
|Index Mark（索引標記） |在預測趨勢中，標記位于趨勢圖軸后面三分之一處。標記的右側顯示了預測趨勢，左側顯示了歷史趨勢。|
原文：
Status bar at bottom right corner indicates
Left hand side of the display shows 8 trends for the tags appearing with the respective pen color on right hand side. Refresh period of every trend Tag is 15 seconds.
By clicking on the individual tag, a low and high setting of data scale for that particular tag is displayed.
? Remote Computer name or Local Computer in use for trends.
? Controller/Estimator Name or No Controller/Estimator assigned.
? Current page of display.
? Time scale span.
? Data scale span.
Pen Assignment Panel
|Items| Description|
| ------------- |:-------------:| -----:|
|Updating Section|
|Server Location | ‘Specify Station Name’ window will popup as shown below. Enter the Computer/Station name where Exasmoc server is installed.|
|Main Controller | Select the Main Controller name from the pull down menu where the currently running controllers are listed up.
|Sub Controller |Select the Sub Controller name from the pull down menu where the Sub Controller corresponding to the selected Main Controller are listed up.
|Trend Type |Select the trend type. When the ‘Historical’ is selected, the standard trend graph is displayed. When the ‘Prediction’ is selected, the prediction data are displayed.
|Acquisition Data | Select the item data from the pull down menu which trend plot are required. Table below shows the list of data to be trended.
|Low Limit / High Limit |Low and High scale setting for data scale.
|Decimal |Operator can select no. of decimal points operator need to use for the values displayed along with trend tags on Trend panel Display.
|Comment | Tag comment entry field. Maximum 50 characters. Area can be scrolled. When a new acquisition data is selected, its name is assigned as default.
|Page comment| Tag comment entry field of each page. Number of Samples Number of samples for each trend data. 17280: Initial value, 10000: Maximum Note) In order to enhance the number of samples, it is also required to enhance the number of Exaopc historical records as follows: ‘Start menu => Program => Exaopc setting’ => Historical data Specify the multiple number of ‘2880’ of ‘HDASM1’ file. Default is 17,280 records.
|Graph Mode Analog / Digital |This indicates Analog or Digital selection made by Engineer. “Analog” - Sine wave type trends are displayed. “Digital” - Square wave type trends are displayed
|Index Mark| In prediction trend, the index mark is located on the one third points behind the trend graph axis. The right side of the mark shows the prediction trend and the left side shows the historical trend.
2017.1.16
