自動填充DCS位號屬性~Auto Fill DCS Tag Attributes

1.進入Reboil測量位號欄;
2.輸入根位號(例如5501F);
3.按Enter鍵或Tab鍵;
4.SMOCPro將生成完成后的測量位號(例如,5501F.PV),但之前已定義過后綴的其它所有位號(例如,閥位5501F.OP和過程輸出5501F.POV)都將使用默認后綴/前綴;
5.你可以修改位號(如有必要)。
在你離開視圖前,UAPC變量窗口將核對你的輸入。如果有任何錯誤,相應欄被標記為紅色,且標簽上標記紅叉。下列對話框提示你選擇單擊Yes離開視圖或單擊No保持視圖打開并修改錯誤。


下面是UAPC變量標簽中不同變量的屬性描述。
? 設定點控制(SPC)– SMOCPro向基于DCS-PID控制器的設定點寫輸出值。
? 直接數字控制(DDC)–SMOCPro向基于DCS-PID控制器輸出直接寫輸出值。
自動填充DCS位號屬性
另一種迅速填寫屬性的方式是使用自動填充功能。此功能為所有屬性自動構建位號名,允許位號名使用變量別名,默認前綴/后綴和默認后綴分隔符。在單擊窗口右上角的Auto Fill(自動填充)按鈕后,彈出以下對話框:

用戶可以選擇覆蓋所有位號唯一屬性或僅填補空白項。
MV詳細信息

領域 默認值 描述
Alias (別名) 工作區內的MV變量名
Description (描述) MV變量描述(與GMB中MV描述相聯系)
Measurement Tag [t](測量位號) MV測量位號 ? SPC: DCS控制器的PV; ? DDC:DCS控制器的輸出。
Setpoint Readback Tag [t] (設定值回讀位號) SMOCPro寫入設定值的回讀位號。 ? SPC: DCS控制器的設定點; ? DDC: DCS控制器的輸出。 回讀位號用于當MV時INACTIVE且Feed Forward(前饋)是TRUE時抑制前饋干擾。回讀位號也被用于防止因不執行動作而windup。
Valve Position Tag [t] (閥位位號) 這個位號映射了基層控制器的輸出(通常是閥)。
Remote/Local Flag Tag [t] (遠程/本地標簽位號) 此位號指示了SMOCPro寫入目標設定值(REMOTE)或不寫入(LOCAL)。
Output Tag [t] (輸出位號) SMOCPro控制器輸出的目標位號。SPC: 輸入DCS控制器設定值(遠程); DDC:輸入DCS控制器的輸出(遠程)。

原文:

  1. Go to the Measurement Tag cell of Reboil.
  2. Key in the Tag root (e.g. 5501F)
  3. Press the Enter key or the Tab key
    4.SMOCPro generates the completed Measurement Tag (for example, 5501F.PV) but also all other Tags whose suffix has been previously defined (e.g. 5501F.OP for the Valve Position and 5501F.POV for the process output) using the default suffixes/prefixes
    5.You can modify the Tags (if necessary).
    The UAPC variable window validates your inputs before you leave the view. If there is any error, the corresponding cell is flagged red and a red cross is marked on the tab. The following dialog prompts you to either click Yes to leave the view or click No to keep the view open and correct the errors.
    Below is a description of the attributes for the different variables in the UAPC Variables tabs.
    ? Set Point Control (SPC) – SMOCPro writes its output to the setpoint of a DCS-based PID controller.
    ? Direct Digital Control (DDC) – SMOCPro writes its output directly to a DCS-based PID controller output.
    **Auto Fill DCS Tag Attributes **
    Another way to quickly fill in the attributes is by using the Auto Fill function. This functionality automatically constructs the tag names for all the attributes that accept tag names using the variable Alias, default prefix/suffix and default suffix separator. After clicking the Auto Fill button on the top right corner of the window the following dialog pops up:
    Users may choose to overwrite all the tag-only attributes or to only fill blank entries.
    MV Details
Field Default Value Description
Alias Name of the MV variable in the workspace.
Description MV Variable description (linked to the MV description in GMB).
Measurement Tag [t] Tag for the MV Measurement.? SPC: the PV of the DCS controller.? DDC: the Output of the DCS controller
Setpoint Readback Tag [t] Readback Tag for the written setpoint from SMOCPro.? SPC: the Setpoint of the DCS controller? DDC: the Output of the DCS controller.The readback Tag is used for feed forward disturbance rejection if MV is INACTIVE and Feed Forward is TRUE. The readback Tag is also used to prevent windup due to non-implementation of moves.
Valve Position Tag [t] This Tag maps the output of the base layer controller (usually a valve).
Remote/Local Flag Tag [t] This Tag indicates if SMOCPro may write to the destination setpoint (REMOTE) or may not write (LOCAL).
Output Tag [t] Destination Tag for the output of the SMOCPro controller.SPC: Enter the (Remote) Setpoint of the DCS controller.DDC: Enter the (Remote) Output of the DCS controller.

2016.6.25

最后編輯于
?著作權歸作者所有,轉載或內容合作請聯系作者
平臺聲明:文章內容(如有圖片或視頻亦包括在內)由作者上傳并發布,文章內容僅代表作者本人觀點,簡書系信息發布平臺,僅提供信息存儲服務。

推薦閱讀更多精彩內容