iOS實現SmartConfig技術(TI)

要做物聯網,首先我們要把硬件連接到WiFi,如何連接有很多種方案,比如在硬件上安裝一個熱點,手機連接這個熱點把WiFi名字和密碼傳給硬件,也可以通過聲波等等......僅說一下在最近項目中用到的:WiFi快連技術.SmartConfig其實是最早攻克這項技術的廠商TI的一種叫法.

原理大致是:
手機APP端發送包含WiFi用戶名WiFi密碼的UDP廣播包或者組播包,智能終端的WiFi芯片可以接收到該UDP包,只要知道UDP的組織形式,就可以通過接收到的UDP包解密出WiFi用戶名密碼,然后智能硬件配置收到的WiFi用戶名密碼到指定的WiFiAP上。

首先你要有一個可以支持SmartConfig技術的硬件(可以直接在TI購買http://www.ti.com.cn/tool/cn/smartconfig);
大致是這樣:

Ti本身就有app,功能簡單,就是把WiFi名字和密碼傳給硬件,讓硬件連上WiFi;
我們要做一個連接界面放到我們的app中,我找了好幾天找到了這個比較好的源碼(https://github.com/ray-x/Wifi-TI3200)
他的效果是這樣子的:

我最終做出來是這個樣子的:

打開上面的工程后看一下文件

紅色箭頭是必須導入的庫,藍色箭頭是主要模塊控制器的代碼,下面的是核心靜態庫

但是這個源碼有個問題,點擊了"Start"之后,控制臺會瘋狂打印app發送的UDP數據包大小Packet size
我目前也不知道如何取消打印,定義NSLog宏和printf宏都不好使,我覺得應該是靜態庫中的問題.雖然不影響使用,但若有人知道如何處理恭請?jiān)u論賜教哇

控制器.h中什么都沒有,下面是我的部分.m中代碼:

#import "JDWifiVC.h"
#import "JDWifiView.h"
#import <SystemConfiguration/CaptiveNetwork.h>//顯示W(wǎng)iFi名稱
#import "MBProgressHUD.h"
//#import "Reachability.h"http://可連接性檢查模塊,監測iOS設備網絡環境
#import "SmartConfigGlobalConfig.h"
#import "SmartConfigDiscoverMDNS.h"
#import "FirstTimeConfig.h"

@interface JDWifiVC ()

@property (nonatomic,weak)JDWifiView *wifiView;
@property (nonatomic, assign) BOOL canceled;//取消彈窗
//@property (nonatomic, strong) Reachability *wifiReachability;
@property (atomic,strong) SmartConfigGlobalConfig *globalConfig;
@property (nonatomic) SmartConfigDiscoverMDNS *mdnsService;
@property (nonatomic) FirstTimeConfig *firstTimeConfig;
@property (atomic, copy) NSString *passwordKey;
@property (nonatomic,weak) NSTimer *mdnsTimer;
@property (nonatomic,assign) BOOL discoveryInProgress;

@end

int const MDNSRestartTime = 15;

@implementation JDWifiVC

- (void)viewDidLoad {
    [super viewDidLoad];
    self.view.backgroundColor = [UIColor whiteColor];
    //設置UI
    [self setupUI];
    //監測wifi狀態,我覺得沒必要用Reachability,連不上用戶自己就去檢查路由器了嘛
   // [self detectWifi];
    self.discoveryInProgress = NO;
    // Do any additional setup after loading the view, typically from a nib.
    //都是庫中的方法,直接調用
    self.globalConfig = [SmartConfigGlobalConfig getInstance];
    // init mdns service
    self.mdnsService = [SmartConfigDiscoverMDNS getInstance];
    // add notification for discovered device
    //自動發現設備
    [[NSNotificationCenter defaultCenter] addObserver:self
                                             selector:@selector(deviceAdded:)
                                                 name:@"deviceFound"
                                               object:nil];
}
-(void)dealloc
{
    //停止發送udp
    [self stopDiscovery];
    [[NSNotificationCenter defaultCenter]removeObserver:self];
}

//跳轉設置界面
-(void)pushSetting
{    
    //需要在plist文件中加prefs
    NSURL *url = [NSURL URLWithString:@"prefs:root=WIFI"];
    if ([UIDevice currentDevice].systemVersion.floatValue <= 10.0)
    {
        [[UIApplication sharedApplication] openURL:url];
    }else{
        // iOS10 之后,只能跳轉到應用設置界面,UIApplicationOpenSettingsURLString這個只支持iOS8之后.
        NSURL *url = [NSURL URLWithString:UIApplicationOpenSettingsURLString];
        [[UIApplication sharedApplication] openURL:url options:@{} completionHandler:nil];
    }
}

//顯示當前連接WiFi名稱
-(void)getCurrentWifiName
{
    //WiFi名字
    NSString *ssid = @"Not Found";
    //mac地址
    NSString *macIp = @"Not Found";
    CFArrayRef myArray = CNCopySupportedInterfaces();
    if (myArray != nil)
    {
        CFDictionaryRef myDict = CNCopyCurrentNetworkInfo(CFArrayGetValueAtIndex(myArray, 0));
        if (myDict != nil)
        {
            NSDictionary *dict = (NSDictionary*)CFBridgingRelease(myDict);
            ssid = [dict valueForKey:@"SSID"];
            macIp = [dict valueForKey:@"BSSID"];
        }
    }
    [self.wifiView.wifiNameBtn setTitle:ssid forState:UIControlStateNormal];
}

//點擊開始連接按鈕
-(void)didClickNextBtn
{
    //先檢查一下
    NSString *wifiName = self.wifiView.wifiNameBtn.titleLabel.text;
    NSString *wifiPassword = self.wifiView.wifiPasswordTF.text;
    if (
        ([wifiName isEqualToString:@"wifi名字"])||
        (!wifiPassword)||
        wifiPassword.length == 0
        )
    {
        [self alertWithMessage:@"請檢查WiFi和密碼是否正確"];
    }
    //開始連接
    else
    {
        //我用的MBHUD,給一個圓環狀進度條,還可以取消連接
        MBProgressHUD *hud = [MBProgressHUD showHUDAddedTo:self.navigationController.view animated:YES];
        // Set the determinate mode to show task progress.
        hud.mode = MBProgressHUDModeDeterminate;
        hud.label.text = NSLocalizedString(@"連接中...", @"HUD loading title");
        
        // Configure the button.
        [hud.button setTitle:NSLocalizedString(@"取消", @"HUD cancel button title") forState:UIControlStateNormal];
        [hud.button addTarget:self action:@selector(cancelWork) forControlEvents:UIControlEventTouchUpInside];
        
        dispatch_async(dispatch_get_global_queue(QOS_CLASS_USER_INITIATED, 0), ^{
            // 更新進度
            [self doSomeWorkWithProgress];
            dispatch_async(dispatch_get_main_queue(), ^{
                [hud hideAnimated:YES];
                [self stopDiscovery];
            });
        });
    }
}

//圓環進度條
- (void)doSomeWorkWithProgress
{
    //開始
    [self continueStartAction];
    self.canceled = NO;
    // This just increases the progress indicator in a loop.
    float progress = 0.0f;
    while (progress < 1.0f) {
        if (self.canceled) break;
        progress += 0.01f;
        
        dispatch_async(dispatch_get_main_queue(), ^{
            // Instead we could have also passed a reference to the HUD
            // to the HUD to myProgressTask as a method parameter.
            [MBProgressHUD HUDForView:self.navigationController.view].progress = progress;
        });
        //發送udp包秒數30秒
        usleep(300000);
    }
}

//取消連接
- (void)cancelWork
{
    [self stopDiscovery];
    self.canceled = YES;
}
//停止發送udp
-(void) stopDiscovery {
    [self.mdnsTimer invalidate];
    self.mdnsTimer = nil;
    self.discoveryInProgress = NO;
    [self.firstTimeConfig stopTransmitting];
    [self mDnsDiscoverStop];
}

- (void) continueStartAction
{
    self.discoveryInProgress = YES;
    [self startTransmitting];
}
/*
 This method start the transmitting the data to connected
 AP. Nerwork validation is also done here. All exceptions from
 library is handled.
 這個方法開始傳輸數據連接Ap。網上驗證也是在這里完成。所有的異常庫處理。
 */
- (void)startTransmitting{
    //假如...就...最后..語句
    @try {
        [self connectLibrary];
        if (self.firstTimeConfig == nil)
        {
            return;
        }
        [self sendAction];
    }
    //出錯的處理
    @catch (NSException *exception) {
        //NSLog(@"%s exception == %@",__FUNCTION__,[exception description]);
        [self performSelectorOnMainThread:@selector(alertWithMessage:) withObject:[exception description] waitUntilDone:NO];
        
    }
    @finally {
    }
}

// check for internet and initiate the libary object for further transmit.
//檢查網絡和啟動庫進一步傳播。
-(void) connectLibrary
{
    NSString *wifiName = self.wifiView.wifiNameBtn.titleLabel.text;
    NSString *wifiPassword = self.wifiView.wifiPasswordTF.text;
    @try {
        //斷開庫
        [self disconnectFromLibrary];
        self.passwordKey = [self.wifiView.wifiPasswordTF.text length] ? self.wifiView.wifiPasswordTF.text : nil;
        NSString *ipAddress = [FirstTimeConfig getGatewayAddress];
        
        self.firstTimeConfig = [[FirstTimeConfig alloc] initWithData:ipAddress withSSID:wifiName withKey:self.passwordKey withFreeData:nil withEncryptionKey:nil numberOfSetups:4 numberOfSyncs:10 syncLength1:3 syncLength2:23 delayInMicroSeconds:1000];
        
        [self mDnsDiscoverStart];
        // set timer to fire mDNS after 15 seconds
        self.mdnsTimer = [NSTimer scheduledTimerWithTimeInterval:MDNSRestartTime target:self selector:@selector(mDnsDiscoverStart) userInfo:nil repeats:NO];
        
    }
    @catch (NSException *exception) {
        //NSLog(@"%s exception == %@",__FUNCTION__,[exception description]);
        [self performSelectorOnMainThread:@selector(alertWithMessage:) withObject:[exception description] waitUntilDone:NO];
    }
}

/**
 MDNS Discovery
 */
- (void) mDnsDiscoverStart 
{
    [self.mdnsService startMDNSDiscovery:nil];
}

- (void) mDnsDiscoverStop
 {
    [self.mdnsService stopMDNSDiscovery];
  }

/*
 This method begins configuration transmit
 In case of a failure the method throws an OSFailureException.
 這個方法開始配置傳輸對于失敗的方法拋出一個OSFailureException
 */
-(void) sendAction{
    @try {
        //NSLog(@"%s begin", __PRETTY_FUNCTION__);
        [self.firstTimeConfig transmitSettings];
        //NSLog(@"%s end", __PRETTY_FUNCTION__);
    }
    @catch (NSException *exception) {
        //NSLog(@"exception === %@",[exception description]);
        [self performSelectorOnMainThread:@selector(alertWithMessage:) withObject:[exception description] waitUntilDone:NO];
    }
    @finally {
        
    }
}
//彈窗警告
-(void)alertWithMessage:(NSString *)message
{
    UIAlertController *alert = [UIAlertController alertControllerWithTitle:@"哎呀,出錯啦" message:message preferredStyle:UIAlertControllerStyleAlert];
    UIAlertAction *action1 = [UIAlertAction actionWithTitle:@"再試一次" style:UIAlertActionStyleCancel handler:^(UIAlertAction * _Nonnull action) {
    }];
    [alert addAction:action1];
    [self presentViewController:alert animated:YES completion:nil];
}

// disconnect libary method involves to release the existing object and assign nil.
//斷開庫方法需要釋放現有對象和分配nil。
-(void) disconnectFromLibrary
{
    self.firstTimeConfig = nil;
}

-(void)deviceAdded:(id)sender
{
    if(self.discoveryInProgress == YES)
    {
        [self stopDiscovery];
        [self alertWithMessage:@"新設備被發現"];
    }
}
這個技術有一個問題,就是連接比較慢.我對iPhone做過一定的測試:
iPhone5S以發送udp包1分鐘為一次,10次連接成功在4次左右,官方app稍高一點,7次左右,但并不是百分之百;
以發送udp包2分鐘為一次,10次連接成功5次左右,是可以稍微提高的;
iPhone6與iPhone5S情況差不多
iPhone6S則不論在哪種情況下10次連接成功都在1次左右,官方app就沒連接成功過(醉了...??)
iPhone7在哪種情況下都沒成功過

打電話給售后給我個郵箱,發送了郵件也不知道猴年馬月能回復...不過搜索了一下6S普遍有這個問題,不知如何解決

最后在技術論壇上找到了答案:應該是硬件兼容性問題.
解決辦法的話,TI適配6S以上的硬件明年才會量產,所以換個廠家的硬件吧??比如 鼎甲微聯http://www.djlink.cn/

希望能幫助到剛做這方面的同僚,節約一點時間;
若有知道如何解決上述問題的,評論留言不勝感激;
若有不妥之處也希望能夠在評論指正,大家一起進步

最后編輯于 ：
?著作權歸作者所有,轉載或內容合作請聯系作者
平臺聲明：文章內容（如有圖片或視頻亦包括在內）由作者上傳并發布，文章內容僅代表作者本人觀點，簡書系信息發布平臺，僅提供信息存儲服務。

推薦閱讀更多精彩內容